Plot Report
-----------

Report Written:     Monday, December 02, 2019
Project Path:       E:\Electronics\Can Bus\Diagnostic Board 01\Diagnostic Board 01.prj
Design Path:        E:\Electronics\Can Bus\Diagnostic Board 01\Diagnostic Board 01.pcb
Design Title:       
Created:            2018/02/22 04:31:33 PM
Last Saved:         2019/12/02 12:14:47 PM
Editing Time:       21370 min
Units:              mm (precision 2)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute mm.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.


Drill Settings
==============

    Excellon Format 1    Format 3.5 absolute in mm.
    Zero suppression None



Plots Output
============

    Plot Job: "E:\Electronics\Can Bus\Diagnostic Board 01\Diagnostic Board 01.mop"


Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Top Silkscreen.gbr

    Layers:
    ------------------
    Top Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D11    Round 0.254
    D24    Round 0.305
    D78    Round 0.127
    D79    Round 0.150
    D80    Round 0.152
    D81    Round 0.076
    D82    Round 0.200
    D83    Round 0.180
    D84    Round 0.508
    D85    Round 0.203
    D86    Round 0.100

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Top Paste Mask.gbr

    Layers:
    ------------------
    Top Paste Mask
    Board Outlines

    D-Code Shape  (mm)
    ----------------------------------------------
    D24    Round 0.305
    D87    Rectangle 2.448 X 3.348
    D88    Rectangle 0.808 X 0.808  Rotation 90
    D89    Rectangle 1.148 X 1.448  Rotation 90
    D90    Rectangle 0.356 X 1.092  Rotation 90
    D91    Rectangle 2.362 X 3.048
    D92    Rectangle 2.448 X 3.348  Rotation 90
    D93    Rectangle 1.848 X 4.848
    D94    Rectangle 1.248 X 2.848  Rotation 90
    D95    Rectangle 0.748 X 0.808
    D96    Rectangle 0.748 X 0.808  Rotation 90
    D97    Rectangle 1.148 X 1.448
    D98    Rectangle 1.948 X 5.448
    D99    Rectangle 0.406 X 1.829  Rotation 90
    D100   Rectangle 0.610 X 1.098
    D101   Rectangle 1.198 X 1.748  Rotation 90
    D102   Rectangle 0.808 X 0.808
    D103   Rectangle 1.848 X 4.848  Rotation 90
    D104   Rectangle 1.148 X 1.648  Rotation 90
    D105   Rectangle 1.549 X 1.651
    D106   Rectangle 0.498 X 1.698  Rotation 90
    D107   Rectangle 0.711 X 1.098
    D108   Rectangle 2.548 X 7.848
    D109   Rectangle 0.298 X 1.648  Rotation 90
    D110   Rectangle 0.548 X 1.448  Rotation 90
    D111   Rectangle 1.048 X 1.248  Rotation 90
    D112   Rectangle 1.248 X 1.448
    D113   Rectangle 1.048 X 2.048  Rotation 90
    D114   Rectangle 1.448 X 2.448  Rotation 90

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Top Copper.gbr

    Layers:
    ------------------
    Top Copper
    Board Outlines

    D-Code Shape  (mm)
    ----------------------------------------------
    D11    Round 0.254
    D12    Round 8.000
    D13    Square 2.000
    D14    Round 2.000
    D15    Round 3.300
    D16    Square 1.524
    D17    Round 1.650
    D18    Square 1.400
    D19    Round 1.200
    D70    Round 3.450
    D71    Round 1.000
    D20    Round 0.650
    D21    Round 0.600
    D22    Round 0.400
    D23    Round 1.250
    D24    Round 0.305
    D115   Rectangle 2.600 X 3.500
    D116   Rectangle 0.960 X 0.960  Rotation 90
    D117   Rectangle 1.300 X 1.600  Rotation 90
    D118   Rectangle 0.508 X 1.245  Rotation 90
    D119   Rectangle 2.515 X 3.200
    D120   Rectangle 2.600 X 3.500  Rotation 90
    D121   Rectangle 2.000 X 5.000
    D122   Rectangle 1.400 X 3.000  Rotation 90
    D123   Rectangle 0.900 X 0.960
    D124   Rectangle 0.900 X 0.960  Rotation 90
    D125   Rectangle 1.300 X 1.600
    D126   Rectangle 2.100 X 5.600
    D127   Rectangle 0.559 X 1.981  Rotation 90
    D128   Rectangle 0.762 X 1.250
    D129   Rectangle 1.350 X 1.900  Rotation 90
    D130   Rectangle 0.960 X 0.960
    D131   Rectangle 2.000 X 5.000  Rotation 90
    D132   Rectangle 1.300 X 1.800  Rotation 90
    D133   Rectangle 1.702 X 1.803
    D134   Rectangle 0.650 X 1.850  Rotation 90
    D135   Rectangle 0.864 X 1.250
    D136   Rectangle 2.700 X 8.000
    D137   Rectangle 0.450 X 1.800  Rotation 90
    D138   Rectangle 0.700 X 1.600  Rotation 90
    D139   Rectangle 1.200 X 1.400  Rotation 90
    D140   Rectangle 1.400 X 1.600
    D141   Rectangle 1.200 X 2.200  Rotation 90
    D142   Rectangle 1.600 X 2.600  Rotation 90
    D143   Round 5.000
    D144   Round 3.000
    D145   Round 1.750

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Top Solder Mask.gbr

    Layers:
    -------------------
    Top Solder Mask
    Board Outlines

    D-Code Shape  (mm)
    ----------------------------------------------
    D24    Round 0.305
    D146   Round 8.152
    D147   Rectangle 2.752 X 3.652
    D148   Rectangle 1.112 X 1.112  Rotation 90
    D149   Rectangle 1.452 X 1.752  Rotation 90
    D151   Rectangle 0.660 X 1.397  Rotation 90
    D152   Rectangle 2.667 X 3.352
    D153   Round 0.552
    D154   Rectangle 2.752 X 3.652  Rotation 90
    D155   Rectangle 2.152 X 5.152
    D156   Rectangle 1.552 X 3.152  Rotation 90
    D157   Rectangle 1.052 X 1.112
    D158   Rectangle 1.052 X 1.112  Rotation 90
    D159   Rectangle 1.452 X 1.752
    D160   Rectangle 2.252 X 5.752
    D161   Rectangle 0.711 X 2.134  Rotation 90
    D162   Square 2.152
    D163   Round 2.152
    D164   Rectangle 0.914 X 1.402
    D165   Rectangle 1.502 X 2.052  Rotation 90
    D166   Rectangle 1.112 X 1.112
    D167   Rectangle 2.152 X 5.152  Rotation 90
    D168   Rectangle 1.452 X 1.952  Rotation 90
    D169   Rectangle 1.854 X 1.956
    D170   Rectangle 0.802 X 2.002  Rotation 90
    D171   Rectangle 1.016 X 1.402
    D172   Rectangle 2.852 X 8.152
    D173   Round 3.452
    D174   Rectangle 0.602 X 1.952  Rotation 90
    D175   Square 1.676
    D176   Round 1.802
    D177   Square 1.552
    D178   Round 1.352
    D179   Round 3.602
    D180   Rectangle 0.852 X 1.752  Rotation 90
    D181   Rectangle 1.352 X 1.552  Rotation 90
    D182   Rectangle 1.552 X 1.752
    D183   Rectangle 1.352 X 2.352  Rotation 90
    D184   Rectangle 1.752 X 2.752  Rotation 90
    D185   Round 1.152
    D186   Round 0.802

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Bottom Silkscreen.gbr

    Layers:
    ---------------------
    Bottom Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D24    Round 0.305
    D150   Round 0.300

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Bottom Copper.gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (mm)
    ----------------------
    D10    Round 0.635
    D11    Round 0.254
    D12    Round 8.000
    D13    Square 2.000
    D14    Round 2.000
    D15    Round 3.300
    D16    Square 1.524
    D17    Round 1.650
    D18    Square 1.400
    D19    Round 1.200
    D70    Round 3.450
    D71    Round 1.000
    D20    Round 0.650
    D21    Round 0.600
    D22    Round 0.400
    D23    Round 1.250
    D24    Round 0.305

Gerber Output
=============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Bottom Copper (Resist).gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (mm)
    ----------------------
    D24    Round 0.305
    D25    Round 8.001
    D26    Round 0.401
    D27    Square 2.001
    D28    Round 2.001
    D29    Round 3.301
    D72    Square 1.525
    D73    Round 1.651
    D74    Square 1.401
    D75    Round 1.201
    D76    Round 3.451

NC Drill Output
===============

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Drill Data - [Through Hole].drl

    Output:
    ---------------------------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.40000 mm 131   F
    T002  0.60000 mm 26    J
    T003  0.75000 mm 3     H
    T004  0.90000 mm 30    D
    T005  1.20000 mm 2     I
    T006  1.30000 mm 8     L
    T007  2.30000 mm 2     AH
    T008  2.50000 mm 4     AG
    T009  3.50000 mm 4     K
    ----------------------------------
    Total            210
    ----------------------------------

E:\Electronics\Can Bus\Diagnostic Board 01\Plots\Diagnostic Board 01 - Drill Data - [Through Hole] (Unplated).drl

    Output:
    -----------------------------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.63500 mm 1
    ----------------------------------
    Total            1
    ----------------------------------


Gerber Output
=============

plot.ger

    Layers:
    ------------------
    [Through Hole]
    Board Outlines


Drill Ident Drawing
===================

    Drill Plated Size  Shape ID
    ------------------------------------
    0.900 Y      2.540 Round D
    0.400 Y      2.540 Round F
    0.750 Y      2.540 Round H
    1.200 Y      2.540 Round I
    0.600 Y      2.540 Round J
    3.500 Y      2.540 Round K
    1.300 Y      2.540 Round L
    2.500 Y      2.540 Round AG
    2.300 Y      2.540 Round AH

    D-Code Shape  (mm)
    ---------------------
    D24    Round 0.305
    D77    Round 2.540
    D78    Round 0.127

End Of Report.
